Alarm systems for separators
Monitoring and remote control of devices installed in the sewage network
Monitoring and remote control of devices installed in the sewage network are integral components of modern water and sewage systems, enabling economical and efficient management. This is primarily due to the need to reduce operating costs and enhance environmental safety by shortening the response time of technical services in the event of a failure.
What sets our EU-AL alarm installations apart?
EU-AL alarm installations are based on indicators that use sensors to continuously monitor the condition of selected parameters of water and sewage devices. They are used in both individual facilities and networked systems.
Individual elements and accessories that make up the EU-AL alarm installation should be selected individually:
- indicator – power supply type and GSM module option,
- sensor configuration – according to the monitored parameter.
Indicators process the signal from sensors located inside the water and sewage devices and allow control or visualisation of their parameters through:
- LEDs located on the main panel
- PC software – connection: computer-indicator via USB cable
- SMS messages (indicator with GSM module)
EU-AL alarm installations provide:
simultaneous monitoring of up to three sensors,
control of the limit switch state (indicator with GSM module),
potential-free outputs,
built-in acoustic indicator,
flash memory storing system configuration and event history (indicator with GSM module),
configuration software for PCs (indicator with GSM module),
three language versions of the software: Polish, English, and Russian (indicator with GSM module).
Application
EU-AL alarm installations are used in separators and sedimentation tanks – in both individual facilities and networked systems.
Alarm systems are extremely important for the efficient and reliable operation of separators of petroleum products / oils and sedimentation tanks.
The system triggers the appropriate alarm when the predetermined level of petroleum products / oils accumulated in the separator, sediment in the sediment part, or water is reached.
This provides the operator with advance information about the need to empty the separator or sedimentation tank, thereby eliminating the risk of overflow.
Alarm installations are supplied complete with devices manufactured by Ecol-Unicon but can also work with other sewage network facilities. The offered systems are flexible, selected according to customer expectations.