Dry well pumping station with a 3-pump system in Głowno
Głowno
2019
Desc
Modernization of the dry well pumping station in Głowno (reconstruction and expansion) along with regulation of the system of collectors supplying sanitary sewage.
Applied solutions
Dry well pumping station with a 3-pump system
with a capacity of Q = 310 m3/h.
Retention module with dimensions:
- module diameter = 2.80m
- module height = 3.20m
The pumping station is equipped with, among others in:
- inlet-pressure piping with a diameter of 250mm
- 2-channel solids separators are located outside the retention module (3 pieces)
- a pneumatic system consisting of a compressor, air preparation station and 3 pneumatic valves with a diameter of DN200
The pumping station was installed in the DZB tank with the following parameters:
- internal diameter: 5.50m
- height = 7.25m